TDLiDAR

Description

TDLidar turns your iPhone into a live depth camera and 40-sensor streaming hub for TouchDesigner, OBS, Resolume and any NDI-aware tool — no capture card or tether. Tap Start NDI and it appears as a 1080p/60fps source on the network. DEPTH MODES • NDI Depth — front TrueDepth or rear LiDAR, live, with 15 colormaps, depth clipping and HD upscale. • LiDAR + Monocular (Pro) — real LiDAR sharpened by a neural network, in metres on a fixed range that never breathes. • ARKit Point Cloud (Beta · Pro) — scan people as live point-cloud silhouettes, or switch to All Surfaces and capture a whole room. Trail, echo, sculpt and gravity FX, colour by height, orientation, confidence or object type, and stream it all to TouchDesigner. • Monocular Depth (Pro) — neural depth from any RGB camera, no LiDAR needed; three model tiers at 60 fps. • Point Cloud (Pro) — live motion FX, Person Only isolation, and bit-exact XYZ+RGB into TouchDesigner POP geometry over Wi-Fi or USB. • Mesh Cloud (Pro) — scan a room into a walkable point cloud; export PLY. CONTROL & SENSORS • Show Control (free) — drive everything remotely over OSC and MIDI: 140+ parameters, mode switching, Look Presets, show blackout. • Sensors mode — ~40 on-device sensors (ARKit body/face/hands, motion, audio FFT, speech, AirPods, Watch heart rate) streamed as OSC. • Cue Deck & Align (Pro) — an OSC trigger-pad grid and a projector-warp rough-in. Everything runs on-device. No accounts, no telemetry, no analytics — data stays on your phone or LAN. REQUIREMENTS iPhone with TrueDepth or LiDAR (LiDAR modes need the scanner). iOS 18.6+. An NDI receiver on the same network. TDLidar Pro is a one-time lifetime purchase, or try everything with a 3-day pass. No subscriptions.

POINT CLOUD OVER USB • Stream point clouds to TouchDesigner through the charging cable instead of Wi-Fi. Switch on USB / Listen Mode in the Point Cloud network settings and connect from the computer — no venue Wi-Fi, no radio interference, and the phone charges while it streams. Wi-Fi still works exactly as before; this is an extra option, not a replacement. ARKIT POINT CLOUD NOW STREAMS • The ARKit Point Cloud mode can now send its cloud to TouchDesigner on its own port, so it runs alongside the Point Cloud and Mesh Cloud streams instead of competing with them. • Front-On keeps the streamed cloud square to the camera rather than rotated by whichever way you happened to be facing when the session started. • A separate stream point budget keeps the network side light without thinning the cloud on screen. SCAN EVERYTHING, NOT JUST PEOPLE • All Surfaces captures the whole scene — walls, furniture, floors — instead of only human silhouettes. • Floors brings back floors and other steeply angled surfaces that the people-scanning filters used to remove. • Reach sets how far out the scan goes, so distant noise doesn't eat the point budget. FOUR NEW WAYS TO COLOUR A SCAN • Height — hue by height, so floor, table and ceiling each read as their own band. • Orientation — hue by the direction a surface faces, separating walls from floors. • Confidence — colour by ARKit's own depth accuracy, so you can see which points to trust. • Classify — a distinct colour for people, floors, ceilings, walls and objects. Plus bug fixes, including camera switching in Point Cloud mode. Everything still runs on-device. No accounts, no telemetry, no analytics.

Informations

Vendeur

ari lintzeris

Catégorie

Developer Tools

Version

9.4.3

Nécessite

iOS 18.6+

Taille

190.2 MB

Classification par âge

4+